High-temperature capability
Selected R290 models provide outlet water up to 80 C for demanding hydronic applications.
80 C R290 Full DC Inverter Series
High-temperature heating, engineered around efficiency.
Air-to-water heat-pump systems for heating, cooling and hot water, with selected R290 models delivering outlet water up to 80 C.
80
°CR290
01Up to 80 C
Outlet water temperature
Selected R290 series02Up to 4.33
Rated COP
Model and test-condition dependent038-22 kW
Heating-capacity range
R290 series: 8, 12, 16 and 22 kW04GWP 3
R290 refrigerant
Natural refrigerant with low climate impactOne integrated system
Move heat into your building instead of creating it from fuel.
The heat pump captures energy from outdoor air and transfers it to the water circuit. Full-inverter control continuously adjusts the compressor, fan and circulation package to match demand.
- 01
Capture energy from outdoor air
- 02
Raise its temperature through the refrigerant circuit
- 03
Transfer heat to the building water system
- 04
Modulate output as operating conditions change
Designed as a complete heating and cooling platform.
Full-inverter control
Variable-speed components adapt output to system demand for smoother, more efficient operation.
Integrated circulation package
The current 80 C line includes an inverter circulation pump and expansion tank inside the unit.
Lower-impact refrigerant
The R290 series uses a refrigerant listed with a global-warming potential of 3.
System guides
Start with the application, then select the equipment.
Explore how heat pumps and hydronic underfloor heating fit into a complete building system before choosing capacities and components.
Air-to-water heat pumps
Depending on the selected model and system design, a heat pump can supply space heating, chilled or cooled water, and domestic hot-water storage. The hydraulic circuit and controls determine how these applications operate together.
Explore heat pumpsHydronic underfloor heating
The floor build-up becomes the heat emitter. Pipe spacing, circuit lengths, water temperature, floor finish and room-by-room demand influence the final layout and operating response.
Explore underfloor heatingSmart control
Clear control, right where you need it.
LCD control and Wi-Fi access make it easier to set operating modes, adjust temperatures and follow system status.
LCD Wi-Fi
High-temperature heat-pump platform
80 C R290 Full DC Inverter Heat Pump
A high-temperature platform combining a Panasonic full-inverter compressor, Danfoss plate heat exchanger and EEV, smart control and an integrated circulation package. Capacity is selected around each project's operating needs.
Download the catalogPanasonic full-inverter compressor
Danfoss plate heat exchanger and EEV
Wi-Fi control and LCD controller
Heating capacities: 8, 12, 16 and 22 kW
Built-in inverter circulation pump
Built-in expansion tank
2008
Gold Group
Heating and cooling experience in Syria since 2008.
From product selection to system planning and installation support, Gold Group works to turn technical equipment into a coordinated, practical solution.
About Gold GroupGOLD
Planning a heating or hot-water project?
Share the building type, area and required water temperature. Our team will help identify the right system direction.